SF Series Solenoid Valve
- Dual Speed Control
- Smooth Speed Adjustment
- Low Speed Startup and Stop
Features:
• The function of two valves in one• A two-speed controller allows for continuous smooth flow and transition from high to low speed cylinder movement
• Multiple flow speeds can be set at various points of actuation
• Allows for precise and refined movement of the cylinders and other hydraulic components
Handling
1. High speed and low speed ow rates are obtained with differential pressure (PA, PB) of 10 MPa.
The flow rate depends on differential pressure.
2. Volume adjustment becomes sensitive P–>A(B) and B(A)–>T differential pressure is too great.
Maintain the pressure differential so that it is no greater than 3.5 MPa.
3. Spool may not move if low speed flow rate is below the minimum usage. Use valve only within the allowable minimum low speed flow rate range.
4. Always keep operating oil clean. Allowable contamination is class NAS11 or less.
5. Dither frequency 80+_Hz; amplitude 200mA+-20ma
6. Compared to the standard model, the terminal box volume of this valve has changed to a three
rotation type.
7. Mounting bolt: JIS B 1176 <5X45-12.9 (four) or No. 10-24UNCX1-3/4 four)
8. Tightening torque: 5-7N-m
Product Specifications
Model No. SF-G01-C*-10 SF-G01-C*-20 SF-G01-C*-40 Model No. DC Solenoid DC Solenoid DC Solenoid Model No. D2 D2 D2 Maximum Operating Pressure 3045 psi Maximum Flow Rate (gpm) 2.6 5.2 10.5 High Speed Flow Rate (gpm) 1.3 to 2.6 2.6 to 5.2 5.2 to 10.5 Low Speed Flow Rate (gpm) .13 to 1.0 .52 to 2.1 1.0 to 4.2 Maximum Allowable Back Pressure (psi) 1000 Acceleration / Deceleration Time Adjustment
Range (SEC)0.1 to 2 Hysteresis 7% Repeatability 3% Power Supply Voltage (V) D2: 24V DC regulated power supply Maximum Power Compensation (W) 36W Operating
EnvironmentDust Resistance/ Water Resistance Rank IP63
(Dust Tight, Rain Proof)Ambient Temperature 41 to 122° F 41 to 122° F Operating
FluidTemperature Range 41 to 140° F Viscosity Range 15 to 300 centistokes 15 to 300 centistokes Filtration 25 microns or less 25 microns or less Mounting
BoltSize x Length 10-24 x 1 3/4 Tightening Torque 3.5 to 5 ft lbs. 3.5 to 5 ft lbs. Operation C510 C520 C540 Type C6S10 C6S20 C6S40 Valve Maximum Operating Pressure 21 MPa 21 MPa 21 MPa Maximum Flow Rate 10L/min 20L/min 40L/min Low Speed Flow Rate 0. 5~4L/min 2~8L/min 4~16L/min Electric Power
Source IndicationPower Source Allowable Voltage
RangeD2 DC24V 21.6~26.4V Operating Conditions
Dustproof And Waterproof :JIS C 0920 IP63 (IEC 60529) Operating Temperature Range :5~50°C Operating Hydraulic Oil :Petroleum Based Hydraulic Oil Operating Hydraulic Oil Temperature Range :5~60°C Operating Viscosity :15~300mm²/s Filtration :25mm or less Valve Mounting Surface :Surface Flatness 0. 01, Surface Roughness 1. 6a Gasket Surface Dimensions :ISO 4401-03-02-0-05