SE Series Solenoid Valve
Features:
- Multiple Valves with Minimal Wiring
- 200mA Holding Current
- Allows the Utilization of I/O and
- Wiring Blocks to Connect
- 3000 PSI
• Allows for 40 LPM at 10MPa
• Increased flow rate at 10 LPM higher than earlier models
• Low power consumption
• Low coil temperature elevation minimizes the effects of heat
• Small chance of coil burnout even with the AC solenoid
• M12-4 pin connector option makes it easier to interface with open networks (e.g., DeviceNet)
• Extended durability
• G01 size is globally compliant and meets TÜV and CE Mark safety standards
Ideal Use:
• Powering a directional valve entirely off a 24 VDC I/O board
• Powering idle system circuits for a lifecycle where pressure/flow rate falls within the SE range (e.g., brake circuits, clamps, dye/injection molders, etc.)
Assembly Specification
Solenoid Type DC Power Supply Type D2 Voltage DC24V Holding Current 0. 2A Holding Power 4. 8W Allowable Voltage Range 21. 6~26. 4V Solenoid Type SE-G01 DC Solenoid D2 Maximum Working
PressureP,A, B ports 3000 psi Maximum Allowable
Back PressureT port 2320 psi Change Over Frequency
(per minute)120 120 Weight
(lbs.)Double Solenoid 4.8 Weight
(lbs.)Single Solenoid 3.7 Dust Resistance/ Water
Resistance RankIP64
(Dust Tight, Splash Proof)Ambient Temperature -4 to 122° F Temperature Range -4 to 158° F Viscosity Range 15 to 30 centistokes Filtration 25 microns or less Mounting Bolt (4) 10-24 x 1 ¾ LG
(not included)
Use Grade 8 or
equivalentTightening Torque 3.5 to 5 ft lbs. Product Specifications
VALVE
SPOOL
TYPEMAXIMUM
OPERATING
PRESSURE
(MPa)PERMISSABLE
BACK
PRESSURE
(MPa)A3X 21 16 C5 21 16 C6 21 16 E3X 21 16